Title

Process Analysis Of Thin Film Deposition With An In Situ Ellipsometer

Abstract

Thin films deposited in high vacuum by thermal evaporation, electron beam evaporation, and ion assisted deposition are anything but smooth, homogeneous, stratified media with plane parallel boundaries as asassumed in thin film design and theory. In particular, the porosity brought about by the columnar microstructure of these films has been a problem ever since their first use. The refractive index may change upon exposure to ambient atmosphere, as a result of H2O adsorption. In-situ rapid scanning spectrophotometers and ellipsometers have helped various researchers to determine the degree of index change and the packing density of the films. Low voltage reactive ion plating is a rather novel deposition technique which produces thin films with packing densities of unity and higher. The dense, vitreous or poly crystalline microstructure, which preventsvents the films from adsorbing water upon exposure to air, yields films with bulk-like optical properties that are constant in time. However, there are problems with increased absorption particularly with ion plated TiO2 and SiO2 multi-layer thin-film stacks. Continuous measurements of n and k during deposition need to be studied in order to determine the location of the increased absorption. Engineering aspects of mounting a Rudolph Research ellipsometer on a Balzers BAP 800 vacuum system will also be discussed. © 1990, SPIE.

Publication Date

1-25-1990

Publication Title

Proceedings of SPIE - The International Society for Optical Engineering

Volume

1166

Number of Pages

346-354

Document Type

Article; Proceedings Paper

Personal Identifier

scopus

DOI Link

https://doi.org/10.1117/12.962906

Socpus ID

84957472591 (Scopus)

Source API URL

https://api.elsevier.com/content/abstract/scopus_id/84957472591

This document is currently not available here.

Share

COinS