Title

Optimization of optical limiting devices based on excited-state absorption

Abstract

Limiting devices protect sensitive optical elements from laser-induced damage (LID). Passive devices use focusing optics to concentrate the light through a nonlinear optical (NLO) element (or elements) to reduce the limiting threshold. Unfortunately, these NLO elements may themselves undergo LID for high inputs, restricting the useful dynamic range (DR). Recently, efforts at optimizing this DR have focused on distributing the NLO material along the propagation path z of a focused beam, resulting in different portions of the device (in z) exhibiting NLO response at different inputs. For example, nonlinear absorbers closer to the lens, i.e., upstream, protect device elements downstream near the focal plane. This results in an undesirable increase in the threshold, although the lowest threshold is always obtained with the final element at focus. Thus there is a compromise between DR and threshold. This compromise is determined by the material. We concentrate on reverse saturable absorber (RSA) materials (molecules exhibiting larger excited-state than ground-state absorption). We look at both tandem devices and devices in which the concentration of the NLO material is allowed to spatially vary in z. These latter devices require solid-state hosts. The damage threshold of currently available solid-state hosts is too low to allow known RSA materials to reach their maximum absorption, which occurs when all molecules are in their excited state. This is demonstrated by approximate analytical methods as well as by a full numerical solution of the nonlinear wave propagation equation over extremely large distances in z (up to 103 Z0, where Z0 is the Rayleigh range of the focused beam). The numerical calculations, based on a one-dimensional fast Fourier transform, indicate that proper inclusion of diffraction reduces the effectiveness of reverse saturable absorption for limiting, sometimes by more than a factor of 10. Liquid-based devices have higher damage thresholds (damage occurs to the cuvette wall) and, thus, larger nonlinear absorption. However, RSA material in liquid hosts may suffer from larger thermal lensing. © 1997 Optical Society of America.

Publication Date

6-20-1997

Publication Title

Applied Optics

Volume

36

Issue

18

Number of Pages

4110-4122

Document Type

Article

Personal Identifier

scopus

DOI Link

https://doi.org/10.1364/AO.36.004110

Socpus ID

0031166233 (Scopus)

Source API URL

https://api.elsevier.com/content/abstract/scopus_id/0031166233

This document is currently not available here.

Share

COinS