Title

Transmission Electron Microscopy Observations On The Phase Composition And Microstructure Of The Oxidation Scale Grown On As-Polished And Yttrium-Implanted Α-Nial

Keywords

β-NiAl; Al O 2 3; High temperature oxidation; Phase transformation; Transmission electron microscopy; Y-implantation

Abstract

Phase transformations and microstructural evolution of thermally grown oxide scale on polycrystalline β-NiAl at 1100°C up to 6h, with and without (e.g., as-polished) yttrium implantation, were examined by glancing angle X-ray diffraction, photostimulated luminescence, scanning and transmission electron microscopy. Site-specific TEM specimens were prepared by using focused ion beam in-situ lift-out technique. The oxide scale developed on as-polished β-NiAl consisted of the islands of 390nm-thick flat regions (e.g., patches) in 916nm-thick scales. Regardless of microstructure, the oxide scale consisted of α-Al2O3 with very little trace of θ-Al2O3, and had uniform compressive residual stress. The oxide scale on Y-implanted β-NiAl had a two-layer microstructure: the outer layer was mainly α-Al2O3 and the inner layer was made up of α-, δ-, and θ-Al2O3 phases. Clearly, the Y addition retarded the θ-to-α Al2O3 phase transformation. The oxide scale on Y-implanted β-NiAl, in general, consisted of a 722nm-thick layer with islands of 470nm-thick patched regions, some of which contained Y-rich nodules that protruded with thickness up to 1200nm. Except for islands of patch-regions, the oxide scale developed on Y-implanted β-NiAl was thinner (722nm) than that on as-polished β-NiAl (916nm). © 2010 Elsevier B.V.

Publication Date

11-25-2010

Publication Title

Surface and Coatings Technology

Volume

205

Issue

5

Number of Pages

1206-1210

Document Type

Article

Personal Identifier

scopus

DOI Link

https://doi.org/10.1016/j.surfcoat.2010.10.034

Socpus ID

78650024912 (Scopus)

Source API URL

https://api.elsevier.com/content/abstract/scopus_id/78650024912

This document is currently not available here.

Share

COinS