High Pressure Shock Tube Ignition Delay Time Measurements During Oxy-Methane Combustion With High Levels Of Co2 Dilution

Abstract

Ignition delay times and methane species time-histories were measured for methane/O2 mixtures in a high CO2 diluted environment using shock tube and laser absorption spectroscopy. The experiments were performed between 1300 K and 2000 K at pressures between 6 and 31 atm. The test mixtures were at an equivalence ratio of 1 with CH4 mole fractions ranging from 3.5% to 5% and up to 85% CO2 with a bath of argon gas as necessary. The ignition delay times and methane time histories were measured using pressure, emission, and laser diagnostics. Predictive ability of two literature kinetic mechanisms (GRI 3.0 and ARAMCO MECH 1.3) was tested against current data. In general, both mechanisms performed reasonably well against measured ignition delay time data. The methane time-histories showed good agreement with the mechanisms for most of the conditions measured. A correlation for ignition delay time was created taking into account the different parameters showing the ignition activation energy for the fuel to be 49.64 kcal/mol. Through a sensitivity analysis, CO2 is shown to slow the overall reaction rate and increase the ignition delay time. To the best of our knowledge, we present the first shock tube data during ignition of methane/CO2/O2 under these conditions. Current data provides crucial validation data needed for the development of future kinetic mechanisms.

Publication Date

7-1-2017

Publication Title

Journal of Energy Resources Technology, Transactions of the ASME

Volume

139

Issue

4

Document Type

Article

Personal Identifier

scopus

DOI Link

https://doi.org/10.1115/1.4036254

Socpus ID

85061163740 (Scopus)

Source API URL

https://api.elsevier.com/content/abstract/scopus_id/85061163740

This document is currently not available here.

Share

COinS