Theses/Dissertations from 1993
Mos-lateral bipolar transistor for bicmos applications, Alejandro Zajac
Analysis and enhancement of reactive low voltage ion plating for thin film deposition, Sohrab Zarrabian
Laboratory simulation of positive pressure ventilation, Pamela Sue Ziesler
Linear contractivity speech coding, Roberto Benjamin Zuniga
Theses/Dissertations from 1992
Modal interactions in the response of laminated composite plates and plate strips using various theories, Abdullah Al Amin
A proposal for graduate software engineering curriculum, Carolyn Stuart Anderson
Two phase flow across a small hole drilled steam generator tube support plate, Douglas Evan Arnold
The design and implementation of an optical characterization system for photorefractive materials/, Timothy M. Ayres
Adaptively thresholding forward looking infrared imagery using a backpropagation neural network, Michael James Baker
An adaptive matched filter for a fading multipath channel using the RLS algorithm, Russell T. Baker
Modeling of gaseous radiation and conduction in fibrous insulations, James F. Barrett
The effect of tourist traffic on delay rate near Walt Disney World, Mounir Bouyounes
Stormwater management and reuse technology, James Nelson Bradner
Dynamic response of a water landing space module during impact upon water, John Richard Brooks
Application and initial assessment of the urban airshed model base case scenario for the east Central Florida region, Kimberly Brown
Performance evaluation of abstract syntax notation one overhead in a heterogeneous network environment, Gamini S. Bulumulle
Evaluation of a new light rail transit corridor between downtown orlando and eastern orange and seminole counties, Derek Carlton Burke
A coupling of modes analysis of saw resonators, Robert Peter Burke
A methodology for integrating simulation and decision theory for evaluation of manufacturing systems, Charles Stephen Carlson
Electrochemical etching studies on silicon, Hsiao Wei Chang
An interpretive language for the implementation of image algebra operators, Louis Donald Cinci
Pump-resonant excitation of diode-pumped solid-state lasers, Jeffrey P. Cuthbertson
The impact of added wastwater treatment sludge on yard waste composting, Allison R. deForest
Toll impacts on the Orlando-Orange country expressway system, Luis E. Diaz
Transfer function identification and control system simulation for czochralski crystal growth, Omar Dube
Accelerated load testing of bridge expansion joints, Kirk Martin Eastman
Incoherent hybrid optical image processing using liquid crystal televisions as spatial light modulators, Jonathan David Emery
Finite element modeling of bridge expansion joint, Jose Alberto Ferrer
Low level communications for power management and distribution by an expert system, Raymond Ashley Fleeman
An improved hybrid technique for the synthesis of chebyshev optimal fir functions for arbitrary complex responses, Cathy Anne Fulton
Visual primitive decomposition using the pattern spectrum, Benito Graniela
Scattering from metallic gratings made of various strip conductivity profiles, Frank Nicholas Grey
The application of above real-time training (ARTT) for simulators : acquiring high performance skills, Ronald J. Guckenberger
The development of a computer aided unified filter program/, James Haas
A methodology for evaluating discrete event simulation approaches, Peter Andrew Haas
Emissions of Hexavalent Chromium From Hard Chromium Plating Operations, Mitchell Scott Hall
A proposed software requirements specification document for the medical device industry, Janis V. Halvorsen
Gallium arsenide schottky fabrication for acousitc charge transport devices, Minh Hai Ha
Design of a computerized pid algorithm for the czochralski crystal growth system, Saiful Haque
C-PI: a platform for developing concurrent code optimizing algorithms, Robert Scott Hartog
Planar periodic mesfet based spatial power combining structures, John A. Heinbockel
An investigation into the response of the goosen aortic heart valve prothesis under steady and pulsatile flow conditions, David Dale Helmers
Investigation of tetravalent cr in laser host materials, Stephanie L. Hirnak
Analysis of a deployable heat shield stabilization system for a space station-based assured crew return vehicle, Kenneth C. Hosterman
Software for the design and analysis of digital filters including finite worldlength effects, James Thomas Ivey
Robust guaranteed cost control of uncertain nonlinear robotic system using mixed minimum-time and quadratic performance index, Joseph H. Kaloust
Characterization of optical gain and nonlinearities in quantum well lasers, Ta Wei Kao
Human factors considerations in the development of instructional materials applied to payload processing tasks at the kennedy space center, David B. Kennedy
Modeling and simulation of a robot manipulator segment, Dean Thomas Kowal
The control of a two-axis robot arm using the tms320c25 software development system, Christopher J. Krecek
Development of a data acquisition system using pen-based computer technology for the automation of the bridge inspection process, Michael J. Leo
Performance limitations of imaging microscopes for soft X-ray applications, Kristin L. Lewotsky
The impact of polymer conditioning on sand bed dewatering of activated sludge, James S. Lock
Properties and formation of new sulfide glasses in the Ba-Ge-W system, Geoffrey D. McCabe
Materials performance evaluation in a corrosive wear environment, Frank Miceli
The measurement of the radial distribution of extinction, absorption and scattering coefficients of aluminum plasmas produced by a Nd : / Glass laser, Thomas E. Mills
Non-destructive Evaluation of Space Shuttle Thermal Protection System Tile Bond Integrity, George David Mulligan
AISC LRFD and ASD code check program for MSC/Nastran, Michael Gerard Murphy
A comparative study of two external data representation languages in heterogeneous computer networks, Hai Lin Nee
Calorimetric studies of absorption in cr3+ : lisralf6 /c, Jinghui Ning
Collimated and diffuse irradiaton of a three dimensional participation rectangular medium, Xing Ouyang
Investigation of steam turbine labyrinth seals using an annular air model, Joseph Anthony Padilla
System identification of a czochralski crystal growth system and simulation by a graphics user interface system, Daniel J. Paterson
Express Transit Service for the University of Central Florida, Arturo J. Perez
Dynamic analysis of a flexible multibody system using lagrangian-finite element method with symbolic formulation, Guru Prasad
The use of coherent optics in combination with numerical analysis and acoustic emission to characterize stress-corrosion cracking, Edward Louis Principe
Mixed transforms for speech signal representation and data compression, Arun Ramaswamy
Landfill gas emission rate measurement using an emission isolation flux chamber, Frederic David Rash
Generation of three-dimensional sonic images using point-in-space-to-ear-canal transfer functions, Scott Allen Sayers
Electromagnetic focusing properties of chirped metallic gratings, Jeffrey C. Schmidt
Photoconductive circuit element (pce) : a theoretical and experimental analysis, Hooman Shakouri
Three dimensional laser contouring of space shuttle tiles, Bret A. Shelton
Parallel implementation and communication of low-level vision operations on a hypercube machine, Yuanlin Shi
The economic utilization of prestressed steel girders for single spanglesan bridges, Russell D. Snyder
Development of a design factor for activated sludge sedimentation tank design based on batchsettling data, Paul D. Tanke
Microchannel fluid flow in a silicon chip, Ronald R. Ulseth
An economic comparison of a bioreactor landfill vs. an invessel composting / digestion unit for the disposal of municipal solid waste, Michael Van Der Heyden
Contour entropy decision directed adaptive filters, Michele Denise Van Dyke Lewis
Analysis and simulation of third order intermodulation products in class AB RF power amplifiers, Roy A. Vaninetti
Pitching analysis of a water landing space module in a post-splashdown water landing, David Edward Van Sickle
Heat removal from a silicon chip using a liquid cooled microchannel, Kenneth L. Wagner
Solution grown cds layers for heterojunction polycrystalline thin film solar cells, D. L. Waterhouse
Multipath propagation of pulse signals in airborne antenna systems, Paul E. Watson
A junction field-effect transistor (jfet) : theoretical analysis and spice modeling, Waisum W. Wong
Evaluating polymer concrete bridge expansion joints using acoustic emission, Michael Joseph Woodard
Diode-pumped tunable Cr : LiSAF laser development, Qi Zhang
The design of a program to perform linear circuit analysis and transfer function determination, Jeffrey S. Zuelch
Theses/Dissertations from 1991
On the Controllability of Impulse Linear Differential Systems, Zoubir Benzaid
New Information System to Improve an Inventory Management Process, Zewdu Beru
Synchronization Primitives for Parallel Processing, Glenn Andrew Boyer
Numerically Controlled Oscillator Based Digital Phase Locked Loop Design and Simulatiohn for Carrier Recovery Application, Thomas James Bryan, Jr.
In-process inspection and quality control for manufacturing systems, Bing Cai
Adaptive Wormhole Routing in Mesh-connected Bidirectional K-ary 2-Cubes, John Austin Carey
Mass Flow Measurement of Gaseous Breathing Air Through the Liquid Air Pack Respirator, Carol Weber Carlson
Implementation of a Human Operator Math Model to Investigate the Feasibility of Minimum Throughput Analysis of Man-in-the-Loop Control System Simulation, Susan B. Carlton
Determination of radiative properties in a radially symmetric plasma colum from remote spectral scanning by spectroscopy and photodetection, James Robert Cassata
Surface acoustic wave resonator parameter extraction and oscillator design, Mark Stephen Cavin
Texture segmentation and classification using fractal and energy measures, Qing Chen
Power amplifier design with GaAs mesfet, Sophia Chen
RS170 image processing interface, Charlotte Christou