Follow

Theses/Dissertations from 2023

PDF

A Thermal, Mechanical, and Materials Framework for a Shape Memory Alloy Heat Engine for Thermal Management and Energy Recovery, Maria Chikhareva

PDF

Electroanalytical Investigations of MicroRNA-conjugated Cerium Oxide based Nanomaterials for Biomedical Applications, Chaimae El Ghzaoui

PDF

Development of High Current Electromigration Test System for Evaluation of Novel Solder Structures, Nicholas Pareis

PDF

Nanostructured Alloy Thin Film Fabrication and Application for Zinc-Air Battery and Lithium-Ion Battery, Guanzhi Wang

Theses/Dissertations from 2022

PDF

A Biodegradable Mg Alloy for Orthopedic Applications, Nadia Aboutalebianaraki

PDF

From Field to Failure: Detecting and Understanding Reliability Defects in Crystalline Silicon Photovoltaics, Dylan Colvin

PDF

In Situ Transmission Electron Microscopy and ab initio Study of the Electrochemomechanical Effect of Lithium Penetration in Electrolytes for All-solid-state Batteries, Megan Diaz

PDF

Processing-Microstructure-Property Correlation for 316L Stainless Steel Manufactured by Laser Powder Bed Fusion, Nathalia Diaz Vallejo

PDF

Turn-On Fluorescence of H-Aggregate Nanoparticles for Selective Protein Detection, Arianna Dicce

PDF

The Effect of Heat Transfer on Microstructural Development For Inconel718 Nickel-Based Superalloy in Laser Powder Bed Fusion, Erica Drobner

PDF

Designing Physical and Chemical Confinement in Lithium Sulfur Battery Cathode for Suppression of Shuttle Effect, Saisaban Fahad

PDF

Characterization of Hot Electrons Generated in Plasmonic Nanostructured Sensors, Corbin Feit

PDF

Synchronous Raman Microspectroscopy and Laser Beam Induced Current Measurements as a Metrology Tool for Solar Cells and Optoelectronic Devices, Jeya Prakash Ganesan

PDF

Improving the Performance and Durability of Metal Contacts in Crystalline Silicon Solar Cells Using Advanced Characterization, Nafis Iqbal

PDF

Designing the Electrochemical Interface to Enable Lithium Metal Batteries, Supriya Koul

PDF

Ceria Defect Engineering Using Thin-Films/ALD and Biological applications, Udit Kumar

PDF

Surface-engineered Catalysts for Water Splitting and Zinc-air Battery, Zhao Li

PDF

Davydov-split Aggregates of Cyanine Dyes for Bovine Serum Albumin Detection, Yiping Ma

PDF

High Performance and Low Cost Passivating, Carrier-Selective Contacts for Silicon Photovoltaics, Jannatul Ferdous Mousumi

PDF

High Voltage Aqueous Electrolyte Based Structural Supercapacitors for Electric Vehicles, Deepak Pandey

PDF

J- and H-Aggregates of Cyanine Dyes for Dopamine Detection., Nitin Ramesh Reddy

PDF

Engineering the Electrode Properties for Developing High Performance Supercapacitors, Kowsik Sambath Kumar

Theses/Dissertations from 2021

PDF

Atomic-Scale Simulation of Dissipation and Adhesion during Interactions between Mineral Surfaces, Baochi Doan

PDF

Solidification Cracking in Binary Al-Cu Alloys Additively Manufactured through Laser Powder Bed Fusion, Keegan Muller

PDF

Surface Engineering of Cerium Oxide Nanocyrstal Dispersions: Colloidal Properties, Ageing Effects, & Electroanalysis, Craig Neal

PDF

Microstructural Development of Inconel 625 Nickel-Based Superalloy as Function of Laser Powder Bed Fusion Parameters, Sofia Nucci

PDF

Actin Cytoskeleton Dynamics and Organization Modulated by Macromolecular Crowding, Cation Interaction, and Nanomaterials, Jinho Park

PDF

Structural Dynamics and Encapsulation Properties of Polyelectrolyte Complex Micelles, Sachit Shah

PDF

Using Peptide Design to Engineer Polyelectrolyte Complex Biomaterials, Sara Tabandeh

PDF

Processing of 3D Porous Biomaterial Scaffolds to Enhance The In Vitro Breast Cancer Tumor Microenvironment, Zi Wang

PDF

Ultra-stable, Highly Luminescent Perovskite-polymer Composites for Solid State Lighting and Display Applications, Caicai Zhang

Theses/Dissertations from 2020

PDF

The Reliability of Through Glass Vias and Solder Joints for Three Dimensional Multi Functional Integrated Systems, Omar Ahmed

PDF

Integrating Graphene into Polymer Derived Ceramics Towards the Development of New Thermoelectric Materials, Elizabeth Barrios

PDF

Diffusion of Fission Products in Nuclear Graphite, Kevin Graydon

PDF

Atomic Layer Deposition of Oxide Materials for Passivated Carrier Selective Contact Solar Cells, Geoffrey Gregory

PDF

Development of Facile Microfabrication Technologies for the Fabrication and Characterization of Multimodal Impedimetric, Plasmonic, and Electrophysiological Biosensors, Cacie Hart

PDF

Designing Metal Nanocatalysts and Tuning their Microenvironment for Gas-involving Electrocatalysis, Lin Hu

PDF

Parametric Investigation and Optimization for Inconel 718 Nickel-Based Superalloy in Laser Powder Bed Fusion, Thinh Huynh

PDF

Understanding Solidification Behavior of Selected Aluminum and Magnesium Alloys Additively Manufactured by Laser Powder Bed Fusion, Holden Hyer

PDF

Investigation of Via Extrusion and The Effect of Cap Layer for 3D Integrated Circuits, Golareh Jalilvand

PDF

Cerium Oxide based Nanocomposites for Supercapacitors, Aadithya Jeyaranjan

PDF

Additive Manufacturing of Copper-based Alloy by Laser Powder Bed Fusion, Binghao Lu

PDF

Mechanical Behavior Assessment of Ti-6Al-4V Alloy Produced by Laser Powder Bed Fusion, Asif Mahmud

PDF

Optimization Studies for the Gas Atomization and Selective Laser Melting Processes of Al10SiMg alloy, Sharon Park

PDF

Non-Linear Inverse Liquid-Solid Chromatography as a Methodology to Characterize Drug Concentration Losses to Polymeric Materials used in Body-on-a-Chip Devices for Drug Discovery, Mark Schnepper

PDF

Development of 3D Porous Chitosan-Based Platform for In Vitro Culture, Kailei Xu

Theses/Dissertations from 2019

PDF

Fabrication and Characterization of Nonlinear Optical Ceramics for Random Quasi-Phase-Matching, Xuan Chen

PDF

Nanoscale Spectroscopy in Energy and Catalytic Applications, Yi Ding

PDF

Development of S-nitroso-N-acetylpenicillamine (SNAP) Impregnated Medical Grade Polyvinyl Chloride for Antimicrobial Medical Device Interfaces, Corbin Feit

PDF

Theoretical and Experimental Study for Tailoring the Electromagnetic Properties of Conductive Materials, Jeffrey Jennings

PDF

Interfacial Behavior in Polymer Derived Ceramics and Salt Water Purification Via 2D MOS2, Hao Li

PDF

Fundamental Core Effects in Co-Cr-Fe-Ni Based High Entropy Alloys, Abhishek Mehta

PDF

Analysis of Residual Stress and Damage Mechanisms of Thermal Barrier Coatings Deposited via PS-PVD and EB-PVD, Linda Rossmann

PDF

Development of In Vitro Point of Care Diagnostics (IVPCD) Based on Aptamers integrated Biosensors, Nileshi Saraf

PDF

Lithium Polysulfide Battery with Improved Capacity and Cycle Performance using Carbon Black Coated Free-standing Carbon Cloth, Zhen Wei

Theses/Dissertations from 2018

PDF

Influence of Chitosan-Alginate Scaffold Stiffness on Bone Marrow Stromal Cell Differentiation, Isabel Arias Ponce

PDF

Cell Printing: An Effective Advancement for the Creation of um Size Patterns for Integration into Microfluidic BioMEMs Devices, Megan Aubin

PDF

Regolith-Based Construction Materials for Lunar and Martian Colonies, Kevin Grossman

PDF

Assessment of Microstructure and Mechanical Behavior of Materials and Phases Observed in Low-Enriched Uranium Monolithic Fuel Plates After Fabrication, Ryan Newell

PDF

The Formation and Characterization of Mesoscopic J- and H-aggregates with Controlled Morphologies by the Co- and Templated Assembly of Cyanine Dyes, Samuel Rhodes

PDF

Simultaneous Measurement of Isotope-free Tracer and Interdiffusion Coefficients in Sandwich Type Diffusion Couples, Esin Schulz

PDF

Graphene Induced Formation of Nanostructures in Composites, Chen Shen

PDF

Advanced Nanoscale Characterization of Plants and Plant-derived Materials for Sustainable Agriculture and Renewable Energy, Mikhael Soliman

Theses/Dissertations from 2017

PDF

Study of Surface Passivation Behavior of Crystalline Silicon Solar Cells, Haider Ali

PDF

The Study of Physiochemical Properties of Cerium Oxide Nanoparticles and its Application in Biosensors, Swetha Barkam

PDF

Carbon Nanotube (CNT) Metallic Composite with Focus on Processing and the Resultant Properties, Md Muktadir Billah

PDF

Polyelectrolyte and hydrogel stabilized liquid crystal droplets for the detection of bile acids, Jinan Deng

PDF

Redox-Active Solid State Materials and its Biomedical and Biosensing Applications, Ankur Gupta

PDF

Interaction Between Carbon Nanotubes and Metals (Al, Cu) and the Effects on Resultant Properties of the Hybrid Materials, Jingyin Jiang

PDF

Electrode Integration of Nanostructured Metal and Metal Oxide Materials Based on in-situ Growth Methods for Environmental Sensors, Xiaochen Wang

PDF

Printable Carbon Nanotube Based Multifunctional Nanocomposites for Strain Sensing and Self-heating, Xin Wang

Theses/Dissertations from 2016

PDF

Synthesis and Characterization of Stable and Metastable Phases in Ni- and Fe-Based Alloy Systems by Mechanical Alloying, Ahmed Al-Joubori

PDF

A Study of Crystallization Behavior in Phase Separated Chalcogenide Glasses, Andrew Buff

PDF

Electrical properties of polymer-derived silicoaluminum carboxide ceramics (SiAlCO) and their applications in micro-sensors, Yejie Cao

PDF

Quantification of the Effect of Degassing on the Microstructure, Chemistry and Estimated Strength of Nanocrystalline AA5083 Powder, Clara Hofmeister

PDF

Design of surface chemical reactivity and optical properties in glasses, Antoine Lepicard

PDF

Nanoengineered Energy Harvesting and Storage Devices, Chao Li

PDF

Fabrication and Investigation of an enzyme-free, Nanoparticle-based Biosensor for Hydrogen Peroxide determination, Craig Neal

PDF

Phase transformation and growth kinetics in reaction zone between uranium alloy and zirconium diffusion barrier, Young Joo Park

PDF

Development of enzyme-free hydrogen peroxide biosensor using cerium oxide and mechanistic study using in-situ spectro-electrochemistry, Shashank Saraf

PDF

Advanced Metrology and Diagnostic Loss Analytics for Crystalline Silicon Photovoltaics., Eric Schneller

PDF

Stress-induced Phase Change Sintering: A Novel Approach to the Fabrication of Barium Chloride Transparent Ceramic Scintillators, William Shoulders

PDF

Interdiffusion, Crystallography and Mechanical Properties of Nickel Manganese Gallium Alloys, Le Zhou

Theses/Dissertations from 2015

PDF

Phase Transformations and Microstructural Evolution in the U-10 wt.% Mo Alloy with Various Zr Additions at 900C and 650C, Nicholas Eriksson

PDF

Catalytic Role of Boron Nitride in the Thermal Decomposition of Ammonium Perchlorate, Kevin Grossman

PDF

Adsorption Behaviour of Polyacrylic Acid on Cerium Oxide Nanostructures: Experimental and Predictive Model, Ali Haghighat Mesbahi

PDF

Porosity Removal of CM247 Ni-base Superalloy using Thermal Heat Treatment without Applied Pressure, Chad Heinrich

PDF

The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium, Catherine Kammerer

PDF

Reactive Sputter Deposition of Lithium Phosphorus Oxynitride Thin Films, A Li Battery Solid State Electrolyte, Prabhu Doss Mani

PDF

Nanoarchitectured Energy Storage Devices, Zenan Yu

Theses/Dissertations from 2014

PDF

Microstructure and Chemistry Evaluation of Direct Metal Laser Sintered 15-5 PH Stainless Steel, Kevin Coffy

PDF

Processing and Characterization of Continuous Basalt Fiber Reinforced Ceramic Matrix Composites Using Polymer Derived Ceramics, Sarah Cox

PDF

An uncooled mid-wave infrared detector based on optical response of laser-doped silicon carbide., Geunsik Lim

PDF

Real time monitoring of Cell-Nanoparticles interaction and tracking internalization process by mechanical probing using Atomic Force Microscopy, Anh Ly

PDF

Electroplated micro- and nanoscale structures for emitters and sensors, Xiaochen Wang

PDF

Processing and Characterization of Multifunctional Thermoplastic Nanocomposite Films, Xin Wang

PDF

Graphene Oxide Reinforcement in Plasma Sprayed Nickel-5%Aluminum Coatings, David Ward

PDF

Non-Oxide Porous Ceramics from Polymer Precursor, Xueping Yang

Theses/Dissertations from 2013

PDF

Corrosion Behaviour Of Aisi 304 Stainless Steel In Contact With Eutectic Salt For Concentrated Solar Power Plant Applications, Omar Ahmed

PDF

The Study Of Photo-reduction Of Cerium Oxide Nanoparticles In Presence Of Dextran: An Attempt In Understanding The Functionality Of The System, Swetha Barkam