Theses/Dissertations from 2023
XPS Study of Calcium Lanthanum Sulfide Ceramics, Brian E. Butkus
A Thermal, Mechanical, and Materials Framework for a Shape Memory Alloy Heat Engine for Thermal Management and Energy Recovery, Maria Chikhareva
Electroanalytical Investigations of MicroRNA-conjugated Cerium Oxide based Nanomaterials for Biomedical Applications, Chaimae El Ghzaoui
Wet Chemical Synthesis of Cerium Oxide Nanoparticle and Biological Application, Yifei Fu
Green Integration of Wafer-scale Two-dimensional MoS2 on Biocompatible and Biodegradable Polymers Towards Transient Electronics, Md Golam Kaium
The Role of Oxygen Impurities in γ-phase Calcium Lanthanum Sulfide for Infrared Applications, Alexandros Kostogiannes
Functionalization of 1D and 2D Nanostructures and Their Applications, Yuen Yee Li Sip
Laser Powder Bed Fusion of Bimetallic Structures, Asif Mahmud
Development of High Current Electromigration Test System for Evaluation of Novel Solder Structures, Nicholas Pareis
Nanostructured Alloy Thin Film Fabrication and Application for Zinc-Air Battery and Lithium-Ion Battery, Guanzhi Wang
Theses/Dissertations from 2022
A Biodegradable Mg Alloy for Orthopedic Applications, Nadia Aboutalebianaraki
From Field to Failure: Detecting and Understanding Reliability Defects in Crystalline Silicon Photovoltaics, Dylan Colvin
Processing-Microstructure-Property Correlation for 316L Stainless Steel Manufactured by Laser Powder Bed Fusion, Nathalia Diaz Vallejo
Turn-On Fluorescence of H-Aggregate Nanoparticles for Selective Protein Detection, Arianna Dicce
The Effect of Heat Transfer on Microstructural Development For Inconel718 Nickel-Based Superalloy in Laser Powder Bed Fusion, Erica Drobner
Designing Physical and Chemical Confinement in Lithium Sulfur Battery Cathode for Suppression of Shuttle Effect, Saisaban Fahad
Characterization of Hot Electrons Generated in Plasmonic Nanostructured Sensors, Corbin Feit
Synchronous Raman Microspectroscopy and Laser Beam Induced Current Measurements as a Metrology Tool for Solar Cells and Optoelectronic Devices, Jeya Prakash Ganesan
Designing the Electrochemical Interface to Enable Lithium Metal Batteries, Supriya Koul
Ceria Defect Engineering Using Thin-Films/ALD and Biological applications, Udit Kumar
Surface-engineered Catalysts for Water Splitting and Zinc-air Battery, Zhao Li
Davydov-split Aggregates of Cyanine Dyes for Bovine Serum Albumin Detection, Yiping Ma
High Performance and Low Cost Passivating, Carrier-Selective Contacts for Silicon Photovoltaics, Jannatul Ferdous Mousumi
High Voltage Aqueous Electrolyte Based Structural Supercapacitors for Electric Vehicles, Deepak Pandey
J- and H-Aggregates of Cyanine Dyes for Dopamine Detection., Nitin Ramesh Reddy
Engineering the Electrode Properties for Developing High Performance Supercapacitors, Kowsik Sambath Kumar
Theses/Dissertations from 2021
Atomic-Scale Simulation of Dissipation and Adhesion during Interactions between Mineral Surfaces, Baochi Doan
Solidification Cracking in Binary Al-Cu Alloys Additively Manufactured through Laser Powder Bed Fusion, Keegan Muller
Microstructural Development of Inconel 625 Nickel-Based Superalloy as Function of Laser Powder Bed Fusion Parameters, Sofia Nucci
Structural Dynamics and Encapsulation Properties of Polyelectrolyte Complex Micelles, Sachit Shah
Using Peptide Design to Engineer Polyelectrolyte Complex Biomaterials, Sara Tabandeh
Ultra-stable, Highly Luminescent Perovskite-polymer Composites for Solid State Lighting and Display Applications, Caicai Zhang
Theses/Dissertations from 2020
Integrating Graphene into Polymer Derived Ceramics Towards the Development of New Thermoelectric Materials, Elizabeth Barrios
Diffusion of Fission Products in Nuclear Graphite, Kevin Graydon
Atomic Layer Deposition of Oxide Materials for Passivated Carrier Selective Contact Solar Cells, Geoffrey Gregory
Designing Metal Nanocatalysts and Tuning their Microenvironment for Gas-involving Electrocatalysis, Lin Hu
Parametric Investigation and Optimization for Inconel 718 Nickel-Based Superalloy in Laser Powder Bed Fusion, Thinh Huynh
Investigation of Via Extrusion and The Effect of Cap Layer for 3D Integrated Circuits, Golareh Jalilvand
Cerium Oxide based Nanocomposites for Supercapacitors, Aadithya Jeyaranjan
Additive Manufacturing of Copper-based Alloy by Laser Powder Bed Fusion, Binghao Lu
Mechanical Behavior Assessment of Ti-6Al-4V Alloy Produced by Laser Powder Bed Fusion, Asif Mahmud
Optimization Studies for the Gas Atomization and Selective Laser Melting Processes of Al10SiMg alloy, Sharon Park
Development of 3D Porous Chitosan-Based Platform for In Vitro Culture, Kailei Xu
Theses/Dissertations from 2019
Fabrication and Characterization of Nonlinear Optical Ceramics for Random Quasi-Phase-Matching, Xuan Chen
Nanoscale Spectroscopy in Energy and Catalytic Applications, Yi Ding
Theoretical and Experimental Study for Tailoring the Electromagnetic Properties of Conductive Materials, Jeffrey Jennings
Interfacial Behavior in Polymer Derived Ceramics and Salt Water Purification Via 2D MOS2, Hao Li
Fundamental Core Effects in Co-Cr-Fe-Ni Based High Entropy Alloys, Abhishek Mehta
Analysis of Residual Stress and Damage Mechanisms of Thermal Barrier Coatings Deposited via PS-PVD and EB-PVD, Linda Rossmann
Development of In Vitro Point of Care Diagnostics (IVPCD) Based on Aptamers integrated Biosensors, Nileshi Saraf
Theses/Dissertations from 2018
Influence of Chitosan-Alginate Scaffold Stiffness on Bone Marrow Stromal Cell Differentiation, Isabel Arias Ponce
Regolith-Based Construction Materials for Lunar and Martian Colonies, Kevin Grossman
Simultaneous Measurement of Isotope-free Tracer and Interdiffusion Coefficients in Sandwich Type Diffusion Couples, Esin Schulz
Graphene Induced Formation of Nanostructures in Composites, Chen Shen
Advanced Nanoscale Characterization of Plants and Plant-derived Materials for Sustainable Agriculture and Renewable Energy, Mikhael Soliman
Theses/Dissertations from 2017
Study of Surface Passivation Behavior of Crystalline Silicon Solar Cells, Haider Ali
The Study of Physiochemical Properties of Cerium Oxide Nanoparticles and its Application in Biosensors, Swetha Barkam
Carbon Nanotube (CNT) Metallic Composite with Focus on Processing and the Resultant Properties, Md Muktadir Billah
Polyelectrolyte and hydrogel stabilized liquid crystal droplets for the detection of bile acids, Jinan Deng
Redox-Active Solid State Materials and its Biomedical and Biosensing Applications, Ankur Gupta
Interaction Between Carbon Nanotubes and Metals (Al, Cu) and the Effects on Resultant Properties of the Hybrid Materials, Jingyin Jiang
Electrode Integration of Nanostructured Metal and Metal Oxide Materials Based on in-situ Growth Methods for Environmental Sensors, Xiaochen Wang
Printable Carbon Nanotube Based Multifunctional Nanocomposites for Strain Sensing and Self-heating, Xin Wang
Theses/Dissertations from 2016
Synthesis and Characterization of Stable and Metastable Phases in Ni- and Fe-Based Alloy Systems by Mechanical Alloying, Ahmed Al-Joubori
A Study of Crystallization Behavior in Phase Separated Chalcogenide Glasses, Andrew Buff
Quantification of the Effect of Degassing on the Microstructure, Chemistry and Estimated Strength of Nanocrystalline AA5083 Powder, Clara Hofmeister
Design of surface chemical reactivity and optical properties in glasses, Antoine Lepicard
Nanoengineered Energy Harvesting and Storage Devices, Chao Li
Phase transformation and growth kinetics in reaction zone between uranium alloy and zirconium diffusion barrier, Young Joo Park
Development of enzyme-free hydrogen peroxide biosensor using cerium oxide and mechanistic study using in-situ spectro-electrochemistry, Shashank Saraf
Advanced Metrology and Diagnostic Loss Analytics for Crystalline Silicon Photovoltaics., Eric Schneller
Stress-induced Phase Change Sintering: A Novel Approach to the Fabrication of Barium Chloride Transparent Ceramic Scintillators, William Shoulders
Interdiffusion, Crystallography and Mechanical Properties of Nickel Manganese Gallium Alloys, Le Zhou
Theses/Dissertations from 2015
Phase Transformations and Microstructural Evolution in the U-10 wt.% Mo Alloy with Various Zr Additions at 900C and 650C, Nicholas Eriksson
Catalytic Role of Boron Nitride in the Thermal Decomposition of Ammonium Perchlorate, Kevin Grossman
Adsorption Behaviour of Polyacrylic Acid on Cerium Oxide Nanostructures: Experimental and Predictive Model, Ali Haghighat Mesbahi
Porosity Removal of CM247 Ni-base Superalloy using Thermal Heat Treatment without Applied Pressure, Chad Heinrich
The Influence of Alloying Additions on Diffusion and Strengthening of Magnesium, Catherine Kammerer
Reactive Sputter Deposition of Lithium Phosphorus Oxynitride Thin Films, A Li Battery Solid State Electrolyte, Prabhu Doss Mani
Nanoarchitectured Energy Storage Devices, Zenan Yu
Theses/Dissertations from 2014
Microstructure and Chemistry Evaluation of Direct Metal Laser Sintered 15-5 PH Stainless Steel, Kevin Coffy
An uncooled mid-wave infrared detector based on optical response of laser-doped silicon carbide., Geunsik Lim